Click Image for Gallery
- Input voltage: AC85~264V, DC110~370V
- Input current: 1A/115V AC, 0.5A/230VAC
- Frequency range: 47~63Hz
- Inrush current: Cold boot 15A/230VAC
- Efficiency (TYP.): 86
- Stand-by consumption: ≤200Mw/230VAC
- Output voltage: DC12V
- Output voltage precision:±1%
- Rated current: DC3.5A
- Rated power: 40W
- Ripple & Noise(rated input voltage,20MHz bandwidth): ≤50mV
- Linear adjustment rate(full-load): ±1%
- Load adjustment rate(10-100% load): ±3%
- Boot time (full-load): 300ms, 30ms/115VAC; 200ms30ms/230VAC
- Hold time (full-load):16ms/115VAC, 50ms/230VAC
- Working temperature: -30-70℃,70℃ boot over-temperature protection(no output), 60℃ return to work.
- Working humidity (RH):20~90%, no condensation
- Temperature drift coefficient: ±0.02%/°c
- Storage temperature and humidity:-40-+85°c, 10-95%RH
- Switch frequency: 20-65 KHz
- Boot delay time (Vin: 230VAC):200ms
- Disconnect hold time (Vin: 230VAC): 20ms
- Protective functions (rated input voltage): over-load protection, short-circuit protection, over-current protection.
- Application: Motors, audio, monitor, air conditioner, fans, solar energy, photovoltaic energy, DVD, LED lights, pumps, industrial equipment appliances, etc.
- Easy to install, the input and the output pre-installed VH3.96-3P ports.
- There are fixed installing holes on the four corners, to prevent movement or vibration from disconnecting, the diameter of the fixed hold is 3.2mm.
- Globally input voltage: 85~264VAC or 110~370VDC.
- High efficiency, high power density, low output Ripple & Noise.
- Isolate input and output
- Short-circuit protection, over-current protection, temperature protection.
- Built-in LCπ type filter, no extend filter circuit.
- Quickly start, when input 220VAC, the boot time add to 300ms.
- CE certification.
- A two-year warranty
- 1 x AC/DC Adapter/Regulator/Driver