DC 12V 1 Channel Non Lock Switch Board DC 12V Wireless Remote Controller

the Mini Wireless Remote Controller, Supporting remote control:150 ~ 200m,Operating Voltage：12V,Control Channel:1 Channel,Work: NON-Lock, Applied to anti-theft alarm, remote control electric windows, signal control, industrial control, lifting equipment, Electrical control circuit, DIY etc.

Non-locking type:
Non-lock (M): Press the A button remote control, the corresponding relay A pick up, After release, relay A disconnected.

This item do not have diagram and manual, please see all the detail below.

The remote control for anti-theft alarm, remote control electric windows, signal control, industrial control, lifting equipment, Electrical control circuit, etc.
Remote control switch module relay contact Independent output, Very suitable for direct control of various types of load; Wireless remote control with fixed code coding technology, No direction, switches without disturbing each other.
 
12V remote control switches,  recommended over 500mA DC power supply.

Each Receiver can withstand 10A maximum current, Direct drive AC loads, each with a set of relays are normally open (normally closed) contacts. To extend the life of Receiver is not recommended to control the power load, the proposed control of power per channel at 1000W (resistive load); 600W (inductive load); 400W (motor load) below.

Feature:

• Operating Voltage: 12V
• Control Channel: 1 Channel
• Work: Non-Lock
• Supporting remote control: 150 ~ 200m (Open Place) one-button remote control

Receiver parameters:

• Operating voltage: DC12V
• Working frequency: 315MHZ
• Contact capacity: ≤ 10A/250VAC; 10A/30VDC
• Receiver sensitivity:>-105dB
• Remote control distance: 150 ~ 200m (open area) (please stretch the antenna in order to achieve effective distance)
• Control approach: one normally open (normally closed) contacts
• Encoding type: fixed code; pad code
• Module size: 39 × 40 × 20mm
• Work status: Non-locking
• Shock resistance: 270K

Remote control parameters:

• Operating voltage: DC12V
• Operating Current: ≤ 10mA
• Operating frequency: 315MHz
• Transmission Distance: 150 ~ 200m (open area) (please stretch the antenna in order to achieve effective distance)
• Encoding type: fixed code; pad code
• Dimensions: 58 × 39 × 14mm
• Oscillation resistance: 1.5M

Package includes:

1. 1x Receiver Board
2. 1x Remote Controller