You are here:>>DC bidirectional low voltage not working
DC bidirectional low voltage not working 2017-10-30T02:29:44+00:00

Home Forums Advice DC bidirectional low voltage not working

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • Inxider
    Post count: 0

    i setup the low voltage to 13v but it did not turn off the lights.

    the light for the LOP is green.

    what else can I try.

    Drok
    Keymaster
    Post count: 2971

    Hello Inxider,
    Thanks for writing in.
    Would you please firstly send us the product link so that we can confirm the item?
    And please can you tell us more details about your operation?
    Best regards.

    inxider
    Post count: 0

    I was testing it, so I setup it to 13.00V but it stayed on, all the way until the battery was completely drained.

    I have it setup on a portable box to power small LED and fans for camping.

    Drok 0-20amp

    https://www.amazon.com/DROK-Multimeter-Charge-Discharge-Electricity-Overvoltage/dp/B0744GQQR4/ref=sr_1_1?ie=UTF8&qid=1509405280&sr=8-1&keywords=drok%2Bbidirectional&th=1

    [url=https://postimg.org/image/7gzh38z08r/][img]https://s1.postimg.org/7gzh38z08r/Drok.jpg[/img][/url]

    I posted Image hope you can see it.

    Let me know what I need to do.

    Thanks.

    Drok
    Keymaster
    Post count: 2971

    Hi inxider,
    We are sorry we can’t see the pictures. Would you mind uploading again?
    Or try to send picturs to our service email. (service@droking.com)
    Best regards.

    inxider
    Post count: 0

    I just send the email.

    I also have another question why the battery bar always show the battery is at 100% when the battery is used all it should be 0%.

     

     

    Drok
    Keymaster
    Post count: 2971

    Hello inxider,
    Have you send pictures to service@droking.com? But we don’t get it yet.
    We are trying to send message to you. Please check your email.
    Best regards.

    Inxider
    Post count: 0

    Hi, I send photo of my wiring.

    let me know if you see a problem.

    thank you.

    Thomas Tavano
    Post count: 0

    I purchased from Amazon the DROK 10-100V Battery Monitor for my 48V golf cart The readings for the voltage seems to me currect but the Battery charge shows 100% all the time.  My 48v golf cart consistet of 6 8volt Deep-cycle lead-acid wet cell Trojan Battery / T875 . How do I fix this?
    <h1 id=”title” class=”a-size-large a-spacing-none”><span id=”productTitle” class=”a-size-large”> </span></h1>

    Drok
    Keymaster
    Post count: 2971

    Hello Thomas Tavano,

    Thanks for writing in.

    Could you please tell us which battery code you choose  in menu 1 and  voltage reading? Would you like to take a video to show your setting?In that way ,we can check it quickly.

    You can share a product link or send attachment to Service@droking.com

    Best regards.

Viewing 9 posts - 1 through 9 (of 9 total)
Reply To: DC bidirectional low voltage not working
Your information: