You are here:>>DROK-180081 Serial connection
DROK-180081 Serial connection 2021-01-12T14:12:46+00:00

Home Forums Advice DROK-180081 Serial connection

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • Harold Simpson
    Post count: 0

    Greetings, I see the 180081 has (at least the holes for) a serial connection. There are two rows. One row is 5 holes. That one I assume is for the USB-Serial adaptor that I have with another DROK unit (5005). The other one, 3 holes is what I am most interested in. I need to connect this unit directly to a serial connection. I hope Im correct in assuming these 3 holes are for a straight serial connection with no “adaptor”. I need to know what standard these are (if they indeed work). I mean by this RS-232 or RS-485 (RS-422 would need at least 4 pins). Can you help me with this and how the port is setup as default?

    Harold Simpson
    Post count: 0

    Is there a direct support email for this question? Does anybody look at these groups? 😀

     

    Drok
    Keymaster
    Post count: 2971

    Hello Harold Simpson,

    Serial communication is not available for 180081.

    Best regards,

    DROK

    Harold Simpson
    Post count: 0

    What unit would you recommend that can take an RS485 Modbus connection directly (no “USB adaptor”)?

    Drok
    Keymaster
    Post count: 2971

    Hello,

    So far we don’have item can do that.

    Best regards.

Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: DROK-180081 Serial connection
Your information: