You are here:>>Missing a mode SKU:300350
Missing a mode SKU:300350 2020-06-06T05:39:56+00:00

Home Forums DROK Customization Missing a mode SKU:300350

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • Richard
    Post count: 0

    Nice little timer board but it is missing a mode.  It needs a mode that as soon as power is applied the delay (OP) starts count down (similar to P6 not requiring external trigger).  When OP reaches zero the relay closes for the amount of time programmed in CL and then opens when the CL timer has finished.  If needed then LOP can repeat.  This mode could be used to ‘press’ the power button after power is restored (and stable) on some devices that do not have the ability to automatically power back on after power loss for example.

    Richard
    Post count: 0

    Sorry, SKU  200350

    Drok
    Keymaster
    Post count: 2971

    Hello Richard,

    P6 doesn’t require  trigger signal. Relay should be energized once power on.

    If there are any questions, please kindly let us know.

    Best regards,

    DROK

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Missing a mode SKU:300350
Your information: