Moved: Reply To: wire diagram

[DrokKeymaster August 12, 2015 at 4:23 am Post count: 2971]

#1835 Reply |

Hi, the 3 wires on the meter is ok, they are just signal wires and without a large current flow. the power of the meter is taken directly from the test circuit, so the red wire should connect to the positive of the auxiliary battery. It’s better if you can send us your hand painted wiring?

Looking forward to your reply.

Best regards.

[Johna142 September 30, 2015 at 8:01 pm Post count: 0]

#2056 Reply |

whoah this weblog is wonderful i really like studying your posts. Keep up the great paintings! You already know, lots of individuals are searching around for this information, you can help them greatly. dfgdeefcgebd

[Pharmf360 October 1, 2015 at 10:49 am Post count: 0]

#2060 Reply |

Very nice site!

[Mike Groszko October 2, 2015 at 12:10 am Post count: 0]

#2061 Reply |

I just received a DC volt/ amp meter(drok DC4.5-30V 10 A Digital) from Amazon and there is no wiring diagram for the three wires (Red Yellow and Black) How should this be hooked up.

Thanks,

Mike Groszko

I also received 2 of your voltage regulators and the diagrams were very helpful.

[DrokKeymaster October 12, 2015 at 6:10 am Post count: 2971]

#2062 Reply |

Dear Mike Groszko,
Sorry for the delay.
Could you please tell us which one do you want to know? Could you please give us the product link, or maybe you can give us your order number.
Thanks!

[DrokKeymaster October 12, 2015 at 6:17 am Post count: 2971]

#2063 Reply |

Dear Johna142,
Thanks for your message. we are striving to improve ourselves in terms of service, quality, sourcing, etc. Any questions, don’t hesitate to write back to us.
Thanks!

[Michel Gauthier July 26, 2019 at 6:23 pm Post count: 0]

#36238 Reply |

Hi, just bought the 051 Drok Dc Multimeter. Panel display will be installed 2 meters from shunt, now what wire gauge should I run between the shunt and and the display panel ?

[DrokKeymaster July 28, 2019 at 8:43 am Post count: 2971]

#36256 Reply |

Hello  Michel Gauthier,

Thanks for writing in. Do you mean  200140 ? Please choose wire gauge base on the actual situation, for example, load current.

Best regards.

[Author]

Posts