MPT-7210A mppt charge controller input ratings

[Mike September 9, 2019 at 4:51 pm Post count: 0]

#36591 Reply |

I recently purchased your MPT-7210A mppt charge controller.

I am not clear regarding the maximum voltage and amperage inputs.

I have 2 solar panels rated at 37.20 Voc and 8.39 A (lsc). If I connect the 2 panels in parallel, will I exceed the input rating for current (~16amps)? or is that within tolerance limits?

What is the maximum input voltage?

What is the maximum input current/amperage ?

[DrokKeymaster September 10, 2019 at 8:50 am Post count: 2971]

#36595 Reply |

Hello Mike,

We have received your email. For this item 200322, max input current is 15A, so 16 A is not  available.

Input voltage range:  DC 12-60v.

Best regards.

 

[Bobby January 12, 2020 at 10:22 pm Post count: 0]

#37318 Reply |

Greetings, what is the maximumm amps this unit can output?

If I put 15 amps in can I get close to 15 amps out?

It looks like there is a limit of 10amps?

 

72 volts x 10 amps = 720 watts

40 volts x 10 amps = 400 watts

 

Is there a way to get the other 320 watts with 40 volts or closer to 40 x 15=600 watts?

[DrokKeymaster January 13, 2020 at 2:54 am Post count: 2971]

#37322 Reply |

Hello Bobby,

Are you talking about 200322? Max output current is 10A. It can’t output 15A.

Best regards.

[Sajeesh May 22, 2021 at 5:51 pm Post count: 0]

#71317 Reply |

<p style=”text-align: left;”>Sir</p>
    I have used 12 volt 40AH battery and 300watt Solar panl, how to set in and out voltage paramerers values, pls help. I know that solar voltage lower than battery setting votage.

[DrokKeymaster May 24, 2021 at 9:36 am Post count: 2971]

#71494 Reply |

Hello Sajeesh，

Could you please tell us which item it is？ Is it 200322?

And only output voltage can be set, input voltage is as the same as what you connect.

Best regards.

 

[Author]

Posts