You are here:>>SKU 2001712003, LCD Hall Cullen Meter Current Voltage Meter
SKU 2001712003, LCD Hall Cullen Meter Current Voltage Meter 2019-11-22T01:14:48+00:00

Home Forums Panel Meter Support SKU 2001712003, LCD Hall Cullen Meter Current Voltage Meter

Viewing 15 posts - 16 through 30 (of 34 total)
  • Author
    Posts
  • Co
    Post count: 0

    Hallo van image pdf kan ik geen google vertaling maken

    Dus graag een originele PDF dus geen image van een PDF

    Die ik via google kan vertalen in het Nederlands

    Gr. Co

     

    Co
    Post count: 0

    <i>Hallo</i> ik wil graag een PDF dus geen foto van de pdf

    Dus graag een originele PDF om te vertalen in het Nederlands met google vertaling

    Co

    Drok
    Keymaster
    Post count: 2971

    Beste klant,

    Onze handleiding is gemaakt door CDR, dus het originele bestand is beeld.

    Het spijt ons, we hebben een ander formaat.Google kan ook afbeelding vertalen.

    De groeten.

    ————————————————————-

    Dear customer,
    Our manual is made by CDR, so the original file is image.
    We are sorry we don’t have other format. Google can also translate image.
    Best regards.

    Christophe j louine
    Post count: 0

    Help.

    I need help to configure my 2001712003 meter.  I have it installed in a 48 volt Golf cart. I  have six batteries at 8v each. I have read the instructions but nothing. Please help me as to what I need to do.

    Drok
    Keymaster
    Post count: 2971

    Hello Christophe j louine,

    AH and FU setting are necessary, please program these two menus as per actual situation.

    Assume battery rated capacity is 120ah, just set AH value as 100ah.

    FU is regarding the maximum voltage  when battery is full charged. When  battery voltage reaches the level, battery icon will be full  automatically.

    Notice: After finish setting, it will not show correct battery capacity at once. Please fully charge battery firstly, the charging current must flow through current sensor.

    Best regards.

    Mike Lesiecki
    Post count: 0

    #2001712003

     

    I set the rated capacity in my case 388, I set the fulfilling voltage when full charged, in my case 12.9 v. I hold the square key until the parameters are set. However the meter does not automatically “fill” when the voltage returns to 12.9, the capacity continues to drop with use until the “remaining capacity” of the battery is down to zero in spite of being recharged to 12.9 volts.

    Can you help? thanks.

    Drok
    Keymaster
    Post count: 2971

    Hello Mike Lesiecki,

    Did you hook up current sensor correctly? Charging current is with minus sign.  If it is positive current, that means the  current flow through  sensor is reverse. Please reverse the sensor.

    Best regards.

    Mike Lesiecki
    Post count: 0

    thank you, the charging current does not flow through the sensor. Only the load passes through the sensor. I had assumed the Fill Capacity was related to voltage.

     

    Mike

    Drok
    Keymaster
    Post count: 2971

    Dear customer,

    After progra AH and Fu parameters,  could you please  try to charge battery firstly instead of discharging battery?

    Best regards.

    Mike Lesiecki
    Post count: 0

    ok

    Johannes
    Post count: 0

    Hello support,

    concerning meter #2001712003:

    I do have more parameters to set than listed in the (weak) description. Can you explain in detail, for the one’s with ‘???’?
    Following parameters in order of appearance (displayed/meaning):
    AH
    CU / CV – ???
    FU / FV – is it really fully charged voltage???
    HU / HV
    LU / LV
    HA
    AA – ???
    AU / AV – ???

    Thanks in advance!

    Johannes

    Drok
    Keymaster
    Post count: 2971

    Hello,

    Please ignore CU,AA, AU menus, they are available for the other version with Bluetooth.

    The available menus are as shown in instruction.   AH and FU are necessary setups. FU is the fully charged voltage.

    The other menus are set as need.

    Best regards.

    Michael Campanelli
    Post count: 0
    This reply has been marked as private.
    Drok
    Keymaster
    Post count: 2971

    Hello Michael,

    Did you program AH and FU parameters?  Both are necessary setting. And after setting parameters, it can’t show correct reading at once.  Please fully charged battery.

    Best regards.

    Martin Ennis
    Post count: 0

    My current display is displaying fff.

    Actual current flow now is 4.5 amps.

    How do I correct this?

    Martin

Viewing 15 posts - 16 through 30 (of 34 total)
Reply To: SKU 2001712003, LCD Hall Cullen Meter Current Voltage Meter
Your information: