DrokKeymasterDecember 3, 2017 at 4:13 amPost count: 2971Guillermo RodriguezApril 5, 2018 at 9:56 pmPost count: 0DrokKeymasterApril 6, 2018 at 7:33 amPost count: 2971Elliot HansenJune 11, 2018 at 11:33 pmPost count: 0DrokKeymasterJune 12, 2018 at 9:58 amPost count: 2971Zach LennonJune 21, 2019 at 12:41 amPost count: 0DrokKeymasterJune 21, 2019 at 9:54 amPost count: 2971William CawthonAugust 26, 2020 at 4:03 pmPost count: 0
is it possible to get these images again?
i want to add the on/off switch as well
Hello Ed Quittkat,
Thank you for writing in.
Do you mean you want to use a switch to control the power supply for this module on/off?
If yes,there is a solder joint place for controlling power on/off.
You can try to remove D2 diode and install it to D1. Then use leading wire to transfer the positive pole of D2 the position of Power on/off and shorted the botton part of the solder joint place of Power On/off.
Here are some images for referrence:
Hope this can help you.
If there is any question, please feel free to contact us.
Best regardsDrokKeymasterAugust 27, 2020 at 9:17 amPost count: 2971James ShrewsburyJanuary 26, 2021 at 12:19 amPost count: 0DrokKeymasterJanuary 26, 2021 at 9:20 amPost count: 2971
Here is instruction for 200536, https://www.droking.com/cs/wp-content/uploads/2021/01/200536说明书-1.pdf