Home › Forums › DROK Customization › VAC8010F-80V non-functioning KWH display
-
AuthorPosts
-
Dale KramerJune 17, 2018 at 4:32 amPost count: 0
Hello Dale Kramer,
Is it this item? https://www.amazon.com/dp/B07B1SJ8W6
Did you use it in charging or discharging mode.
Best regards.
Dale KramerJune 22, 2018 at 7:20 pmPost count: 0GeorgeSeptember 11, 2019 at 7:03 amPost count: 0Hello George,
Is it this item 2001802003?
Does greyed out mean screen turns off? To check problem for you, would you please kindly take a video to show how it is? You can share video link here or send it directly to service@droking.com
Best regards.
GeorgeSeptember 11, 2019 at 12:27 pmPost count: 0AndyJune 29, 2020 at 8:01 pmPost count: 0Hello Andy,
Are you talkikng about above item? 2001802003?
Did you program BPC parameter only? How is BAT setting?
Best regards,
DROK
Michael WardAugust 22, 2020 at 4:13 pmPost count: 0Hello Michael Ward,
Do you mean this item?
Sorry, we are not sure the 6 wires you mentioned. Would you like to show it by image?
Best regards,
DROK
- This reply was modified 4 years, 2 months ago by Drok.
michael wardSeptember 6, 2020 at 1:05 pmPost count: 0Hi
Working on and off now but range is 15 feet with extended wifi radio on sensor end, 8 wires not 6.
Also put bypass cap on radio dc input on sensor end.
I ordered more powerful radio for both ends with hope that extends com range
My system is 120V dc batteries 225Ah with wind and solar charging bat range 113-145V, current =0-25A
-
AuthorPosts