VAC8010F-80V non-functioning KWH display

[Dale Kramer June 17, 2018 at 4:32 am Post count: 0]

#29879 Reply |

I have two of these and am able to set BAT and BPC to be able to watch capacity in AH and % count down to 0.

I have not been able to get KWH to show anything but 0. The time (8) on display description does count up after doing a RET but KWH does not.

How do I get KWH to work?

 

[DrokKeymaster June 21, 2018 at 10:15 am Post count: 2971]

#29887 Reply |

Hello Dale Kramer,

Is it this item? https://www.amazon.com/dp/B07B1SJ8W6

Did you use it in charging or discharging mode.

Best regards.

[Dale Kramer June 22, 2018 at 7:20 pm Post count: 0]

#29892 Reply |

Ah, now I see that KWH only increments positively when the current is positive.

What is the reason that it does not measure KWH of discharge?

[DrokKeymaster June 25, 2018 at 9:37 am Post count: 2971]

#29915 Reply |

Hello Dale Kramer，

In charging mode, kwh value increases. In discharging mode, it dicreases. When it is 0, it will not change again.

Best regards.

[George September 11, 2019 at 7:03 am Post count: 0]

#36601 Reply |

<p style=”text-align: left;”>Hi, mine won’t connect to wireless, just greyed out after a few seconds.</p>

[DrokKeymaster September 11, 2019 at 8:06 am Post count: 2971]

#36602 Reply |

Hello George，

Is it this item 2001802003?

Does greyed out mean screen turns off? To check problem for you, would you please kindly take a video to show how it is? You can share video link here or send it directly to service@droking.com

Best regards.

[George September 11, 2019 at 12:27 pm Post count: 0]

#36605 Reply |

<p style=”text-align: left;”>Hi, I don’t get any voltage or parameters on screen just all zeros. As if it doesn’t connect to module. Can get a video tomorrow.</p>
Regards

George

[DrokKeymaster September 12, 2019 at 8:03 am Warning: mysqli_query(): (70100/1317): Query execution was interrupted in /www/wwwroot/droking.com/cs/wp-includes/wp-db.php on line 1924 Post count: 2965]

#36609 Reply |

Hello George,

You can  check  wireless communication indicator  on the left bottom of display .And is the load and power supply  connected well with module?

Best regards.

[Warning: Error while sending QUERY packet. PID=10651 in /www/wwwroot/droking.com/cs/wp-includes/wp-db.php on line 1924 Pike June 12, 2020 at 6:16 pm Post count: 0]

#39515 Reply |

How do you calibtate these meters?

[DrokKeymaster June 14, 2020 at 9:23 am Post count: 2971]

#39565 Reply |

Hello Pike,
May I know more details about your problem?
What parameters do you want to calibrate?
Best regards.

[Andy June 29, 2020 at 8:01 pm Post count: 0]

#40264 Reply |

I have installed the unit, appears to be working but the battery charge state isn’t working. If I set the capacity at zero, it shows as fully charged, but anything more than zero the remaining capacity graph drops to zero even if I set a greater than zero value for BPC.

[DrokKeymaster June 30, 2020 at 7:12 am Post count: 2971]

#40291 Reply |

Hello Andy,

Are you talkikng about above item? 2001802003?

Did you  program BPC parameter only？ How is BAT setting？

Best regards,

DROK

 

[Michael Ward August 22, 2020 at 4:13 pm Post count: 0]

#44212 Reply |

i just purchased  vac8010f

i’am very disappointed at wifi range of about 3 yrds,  with out any walls.

Can I extend the little plugin wifi unit 6 wires on the transmit end ?  shielded cable?

If so what is the max length ?

Please send the schematic or pin-out.

thanks

be safe

michael

 

[DrokKeymaster August 24, 2020 at 8:40 am Post count: 2971]

#44357 Reply |

Hello Michael Ward，

Do you mean this item?

https://www.droking.com/Digital-Meter-Multifunction-Panel-Meter-DC-6V-80V-300A-999-KW-LCD-Display-Tester-Monitor-Meter-Multimeter-Thermometer

Sorry, we are not sure the 6 wires you mentioned. Would you like to show it by image?

Best regards,

DROK

 

• This reply was modified 4 years, 9 months ago by  Drok.

[michael ward September 6, 2020 at 1:05 pm Post count: 0]

#45592 Reply |

Hi

Working on and off now but range is 15 feet with extended wifi radio on sensor end, 8 wires not 6.

Also put bypass cap on radio dc input on sensor end.

I ordered more powerful radio for both ends with hope that extends com range

My system is 120V dc batteries 225Ah with wind and solar charging  bat range 113-145V, current =0-25A

[Author]

Posts