You are here:>>Wiring Ammeter Dual
Wiring Ammeter Dual 2015-10-31T22:30:14+00:00

Home Forums Panel Meter Support Wiring Ammeter Dual

Tagged: ,

Viewing 15 posts - 31 through 45 (of 59 total)
  • Author
    Posts
  • Drok
    Keymaster
    Post count: 2641

    Hello Tom Fisher,
    Thank you for writing in.
    So sorry that we cannot find the product by DROK part # X000MC5S7.
    Could you please check the part # X000MC5S7 again or tell us your order ID so that we can ensure the product?
    Waiting for your reply.
    Best regards

    harry fare
    Post count: 0

    YB27VA VOLT AMMETER 3.5-30V 2AMP DUAL METER

    WHAT IS THE WIRING DIAGRAM
    WHERE IS THE WIRING DIAGRAM
    WHY CANT I FIND INFO
    CURRENT METER HAS 3 WIRES …
    WHY DID I BUY THIS THING???

    Drok
    Keymaster
    Post count: 2641

    Hello harry fare,
    Thank you for writing in.
    Since there are many products with similar product title, it is hard for us to ensure which product you have bought?
    Could you please tell us your order ID or the link of the product so we can find a solution more quickly?
    Waiting for your reply.
    Best regards

    Georg
    Post count: 0

    Hi!
    I’ve bought the device from https://www.amazon.de/gp/product/B00H5KVG3I/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 and I have really strange problems to operate it. I wired it like scheme 3. The current which is measured by a multimeter is 356 mA and the Ampermeter is displaying anything abuat 8.2 Amperes! By using the adjustement poti, I can reduce the displayed value down to 7 A, but not into the range to have the right value.
    What I’m doing wrong?

    Kind regards,
    Georg

    Drok
    Keymaster
    Post count: 2641

    Hello Georg,
    Thank you for writing in.
    Could you please tell us more details of your application, such as the input voltage/current, the load, the wiring, the working environment?
    If you can, we sincerely hope that you can send us some images to let us check the problem details.
    With your help, we can find a solution more quickly.
    Waiting for your reply.
    Best regards

    Ian
    Post count: 0

    Hi, I purchased a dual voltage/Ammeter display from Amazon and there were no instructions with it or on the website.

    Can you send me a datasheet and connection details for :-

    YB27VA
    Input volts => 3.5 to 30V
    Current Range =>50A

    Thanks

    Drok
    Keymaster
    Post count: 2641

    Dear friend,
    Thanks for writing in.
    We are sorry for any inconvenience caused you.
    Could you please send us the link of product so that we can confirm the item?
    Best regards

    Drok
    Keymaster
    Post count: 2641

    Hello Ian,
    Thanks for writing in.
    We are sorry for any inconvenience caused you.
    Could you please send us the link of product so that we can confirm the item?
    Best regards

    Peter
    Post count: 0

    Hello,

    My B017FSED9I DC panel meter reads 20.8V when connected to my 12V battery as the ‘DC IN’.

    The ‘LOAD’ is a 12v LED light that draws 0.8 amps.

    The amp reading on the meter measures correct at 0.8A, but the voltage reading measures incorrect at 20.8v. It should be measuring about 12.7vdc.

    Is there a calibration procedure for the meter?

    Or is my meter defective / broken?

    Thank you,
    Peter

    Drok
    Keymaster
    Post count: 2641

    Hello Peter,
    Thank you for your writing in.
    To find out the problem origin, could you please try to measure the voltage without connection with load?
    Look forward to your reply.
    Best regards.

    Lee Buxbaum
    Post count: 0

    I recently purchased six of your Drok Micro Volt Amp Meters, X000PTHDOX. I am using 2 of them to measure the voltage/current consumption of the hotend and another one to measure the voltage current consumption of the heated bed of my 3D printer. The hotend is powered by its own 12v/30A Power Supply and the heated bed is powered by its own 24v/15A power supply.I have an external 750mV shunt for each. I have attached a link to a block diagram of how I currently have it wired up.The problem I have had (4 times) is that the 24v meter smokes and dies when hooked to the 24v power supply. I have even switched the thin red and black wires to the 12v supply for power but to no avail. Please advise. ASAP.

    Drok
    Keymaster
    Post count: 2641

    Hello Lee Buxbaum,
    Thanks for your business. Is this item that you have bought?
    product link
    You said you have attached a link, but we see no information about it. Would you please send it again?
    In addition, did you write it up as the following picture showed?
    100016
    Best regards.

    P. St. Archer
    Post count: 0

    Bought an AC Digital multi- function meter. Model PZEM-011.  I need clarification on the order of wiring for the unit.

    Thanks.

    Drok
    Keymaster
    Post count: 2641

    Hello P. St. Archer,
    Thanks for writing in.
    Would you please let us know if it is this item?200071
    The picture on the back of meter has showed the wiring diagram. And there is no distinction between positive and negative. Please feel free to hook it up like the diagram.
    Best regards.

    Laurence Pearson
    Post count: 0

    I have purchased 2 of your 100v/100a micro panel meters.No wiring information came with it.Where can I get hook up information? I have purchased several of your power supplies and am pleased except for the lack of documentation. I see at Amazon’s web site that many of your customers are confused for the same reason.

Viewing 15 posts - 31 through 45 (of 59 total)
Reply To: Wiring Ammeter Dual
Your information: