You are here:>>WLS-PVA200 Voltage only showing what set in CV (CU), and not actual voltage
WLS-PVA200 Voltage only showing what set in CV (CU), and not actual voltage 2022-07-31T17:34:14+00:00

Home Forums Panel Meter Support WLS-PVA200 Voltage only showing what set in CV (CU), and not actual voltage

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Scott
    Post count: 0

    New WLS-PVA200.
    Using two wire hookup method.  I have additional parameters in setup screens like “CV”, etc. that are not mentioned in documentation.  Whatever is set to “CV” is what voltage is displayed on status screen, and not the live, dynamic voltage.  Need this fixed or must return to Amazon.

    Scott
    Post count: 0

    Please disregard my previous post.  For everyone who has this latest firmware on WLS-PVA200 and similar models, only set AH and FV.  For all other parameters, leave at 0000.

    I got mine to finally work.

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: WLS-PVA200 Voltage only showing what set in CV (CU), and not actual voltage
Your information: