-46% Digital Meter/Charge and Discharge Tester DC 8 ~ 28V Control Switch DC 0~30V/10A, AC 0 ~ 250V/10A Relay Controller

Ask Question

It is a Digital Tester/Relay Controller, Operating voltage: DC 8 ~ 28V (limitation DC 8 ~ 32V), Load capacity: maximum load capacity of relay's normally open port: DC 0 ~ 30V / 10A, AC 0 ~ 250V / 10A; maximum load capacity of relay's normally closed port: DC 0 ~ 28V / 10A, AC 0 ~ 125V / 10A, Application:Suitable for electronic equipment,industrial equipment etc.

Parameters:
  • Operating voltage: DC 8 ~ 28V (limitation DC 8 ~ 32V)
  • Consumption: 0.2W (turn off the display: 0.1W; relay-operating: 0.6W)
  • Operating temperature: recommend -20°c ~ 60°c (limitation -30°c ~ 70°c)
  • Measuring range: DC 0.0 ~ 99.9V
  • Load capacity: maximum load capacity of relay's normally open port: DC 0 ~ 30V / 10A, AC 0 ~ 250V / 10A; maximum load capacity of relay's normally closed port: DC 0 ~ 28V / 10A, AC 0 ~ 125V / 10A
  • Module size: 46 x 70 x 20mm
Module functions:
  • Function 1:
    • Voltage measurement: when select this function the relay will not operate, the display shows the current measurement voltage.
  • Function 2:
    • Charging monitoring: when the measured voltage is lower than the lower limit voltage, the relay operates; when the measured voltage is higher than the upper limit voltage, the relay disconnects.
  • Function 3:
    • Discharging monitoring: when the measured voltage is higher than the upper limit voltage, the relay operates; when the measured voltage is lower than the lower limit voltage, the relay disconnects.
  • Function 4:
    • Operate within the range: when the measured voltage is between the upper and lower limits, the relay operates; in other cases, the relay disconnects.
  • Function 5:
    • Operate outside the range: when the measured voltage is lower than the lower limit voltage, or the measured voltage is higher than the upper limit voltage, the relay operates; in other cases, the relay disconnects.
Module interfaces:
  • Input interfaces:
  • DC+: power supply positive
  • DC-: power supply negative
  • VIN: detecting port of measuring voltage
  • Output interfaces:
  • NO: relay's normally open interface. It will be hanging before the reply operates; it will short connect to COM after relay operates.
  • COM: relay's common interface
  • NC: relay's normally closed interface. It will short connect to COM before the relay operates; it will be hanging after the reply operates.
Function features:
  • Provide five functions to meet more application requirements.
  • Can set the voltage's upper and lower limits.
  • The measurement accuracy is ± 0.1V.
  • Add the pull-off delay and break delay functions.
  • All setting parameters can be automatically saved; power-down will not lose the settings.
  • Redesigned power supply module to ensure the stability of the module over a wide voltage range.
Package includes:
  • 1 x Voltage Monitoring Controller (Digital Tester)
Attributes
input voltage8~28V
output current10A
output power--
output voltage--
output ways1

Write a review

Please login or register to review

Digital Meter/Charge and Discharge Tester DC 8 ~ 28V Control Switch DC 0~30V/10A, AC 0 ~ 250V/10A Relay Controller

  • Brand: Drok
  • Product Code: 200231
  • Availability: In Stock
  • $19.50
  • $10.50
  • Bulk Buy Discounts. Buy more please contact us
    Qty5102030+
    Price$9.40$8.91$8.42$7.92