12 v battery bank

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
Henry Fleischer
September 4, 2019 at 1:40 am

Post count: 0

#36548 Reply |

I have a 12 volt battery bank which is charged by solar and wind generator to charge batteries. I need something to run 12 v constant power into and put out 6 amps to antenna transmitter the carries video signal 10 miles as I need to power my camera with 12 v and 1.5 volt what do you suggest to use for both…. they are both on constant 12 v power.

Henry Fleischer
September 4, 2019 at 1:48 am

Post count: 0

#36549 Reply |

12v@ 1.5 amp for the camera

Drok
Keymaster

September 4, 2019 at 9:30 am

Post count: 2971

#36550 Reply |

Hello Henry Fleischer,

Do you mean buck converter or boost converter? Would you please tell us the specific input voltage range?

Best regards.

Henry Fleischer
September 4, 2019 at 1:19 pm

Post count: 0

#36552 Reply |

12 v battery bank….. power antenna need 12 v power @ 6 amps and the camera needs 12 v @ 1.5 amps … so I/m thinking the step down….

Henry Fleischer
September 4, 2019 at 1:26 pm

Post count: 0

#36553 Reply |

looking at DC buck converter drok dc-dc step down voltage regulator 10 v-75 v to 0-60 12A part number i think DKP6012

Henry Fleischer
September 4, 2019 at 1:51 pm

Post count: 0

#36554 Reply |

input voltage on the power supply reads input 100-240v -1.2 amp max 50-60 hz output 12v – 6A

camera ac/dc adapter reads input ac 100-240v 50-60 hz -0.4A output 12v 1.5A dc

Drok
Keymaster

September 5, 2019 at 6:36 am

Post count: 2971

#36563 Reply |

Hello Henry Fleischer，

Actually the input voltage range we mean is for voltage converter input. But it seems you need a converter from 12v to 12v.

If it is that case, we are sorry we don’t have such converter. If input for converter is 12v, output voltage should be higher or lower than input.

Best regards.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)