You are here:>>300425 display always 0
300425 display always 0 2018-10-17T10:34:12+00:00

Home › Forums › Voltage Regulator Support › 300425 display always 0

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Robert Brighton
    October 17, 2018 at 10:34 am
    Post count: 0
    #35153 Reply |

    Hi I have 2 no. 300425 signal generators which only display 0. The output works perfectly but the display never changes from 0.

    I have tried going through the menus and cannot get the units to do anything else.

    Both units have worked but the power supply has been removed from them for 3 months during project installation.

    Any advice?

    Many thanks, Rob

    Drok
    Keymaster
    October 18, 2018 at 9:25 am
    Post count: 2971
    #35156 Reply |

    Hello Robert Brighton,

    Thanks for writing in.

    Do you mean this problm comes up after disconnecting power supply for 3 months? Can it display something when you press S1 and S2 simultaneously？

    Best regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: 300425 display always 0
Your information: