900W Power Supply Module DC 8~60V to 10~120V 15A Voltage Regulator/Adapter

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
Mustafa N.
August 7, 2019 at 5:46 am

Post count: 0

#36332 Reply |

Hello,

voltage regulator used to work perfectly up until a week ago. Now I set the voltage to 55.5 and on the LED it shows increasing numbers like 63, 65, 70Volts. When I measure the output it shows 55.5 and output current also displays much higher than the set value. I set the output to 4Amps and LED shows 7 amps and fluctuating. In reality it doesnt send current. What could be wrong?

Thanks

Mustafa N.
August 7, 2019 at 5:49 am

Post count: 0

#36333 Reply |

by the way the product I am using is:
<h1 class=”heading-title”>900W Power Supply Module DC 8~60V to 10~120V 15A NC Voltage Regulator/Adapter/Boost Converter/Constant Voltage Current Driver Module High Precise Adjustable Output 48V 24V 12V DC Power Supply with LED Display Voltmeter Ammeter</h1>

Drok
Keymaster

August 7, 2019 at 9:36 am

Post count: 2971

#36339 Reply |

Hello Mustafa N.，

Thanks for writing in.

We need to check if it is this one, https://www.amazon.com/dp/B01GFVI6R6/ref=as_li_tl?tag=proeng-20

Is it convenient for you to show how it is by video? In that way, we can check it qucikly. For example, connection, display.

You may share it here or send video attachment to Service# droking dot com(please replace# @)

Best regards.

Mustafa N.
August 7, 2019 at 1:53 pm

Post count: 0

#36342 Reply |

Yes it is the same one you sent in the amazon link.

I sent a video. The size was around 40MB. Iphone sent it as a link to maildrop.

Thanks a lot
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)