You are here:>>AC 110V-240V switch power supply with battery interface AC-DC 10A #200188_EU
AC 110V-240V switch power supply with battery interface AC-DC 10A #200188_EU 2017-03-29T08:18:42+00:00

Home › Forums › Voltage Regulator Support › AC 110V-240V switch power supply with battery interface AC-DC 10A #200188_EU

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • Ernesto
    March 29, 2017 at 8:18 am
    Post count: 0
    #14250 Reply |

    Is there any datasheet or manual for this product? What is the “test” connector?

    Drok
    Keymaster
    April 1, 2017 at 6:05 am
    Post count: 2971
    #14440 Reply |

    Hello Ernesto,
    Thank you for your writing in.
    We are sorry for any inconvenience caused you.
    The “test” connector is for testing load, which is not necessary to connect in general cause.
    The Connection is as follow:
    〨: Ground
    N: Null line.
    L: Live line
    BAT+ BAT-: connect the positive and negative of battery
    V+V-: connect the positive and negative of load
    For more question,please feel to contact us.
    Best regards.

    Ernesto
    April 1, 2017 at 11:45 pm
    Post count: 0
    #14488 Reply |

    Hi

    No inconvenience, I’ve not bought the power supply yet. I’m looking for a 12vdc UPS, and I would really like to find more technical details for this device before buy.

    MAtteo
    April 24, 2017 at 11:31 am
    Post count: 0
    #15947 Reply |

    Hello, what does the flashing RED led mean?

    Drok
    Keymaster
    April 25, 2017 at 8:11 am
    Post count: 2971
    #15974 Reply |

    Hello MAtteo,
    Thank you for writing in.
    To give an accurate answer, would you please tell us which item you mention?
    Is it #200188?
    Look forward to your reply.
    Best regards.

    Matteo
    April 25, 2017 at 7:58 pm
    Post count: 0
    #15996 Reply |

    i’m referring to the item “AC 110V-240V switch power supply with battery interface AC-DC 10A #200188_EU”

    Drok
    Keymaster
    April 26, 2017 at 9:13 am
    Post count: 2971
    #16021 Reply |

    Hello Matteo,
    Thanks for your reply.
    When charging battery, the red LED flashs.
    Please note, if the charging current is too low， the red LED will not flashs.
    Best regards.

    Andrea
    June 19, 2017 at 7:54 am
    Post count: 0
    #18709 Reply |

    Is there a capacity limit for the batteries?
    For example, can I connect a battery 12V 26Ah, less or even more?

    Drok
    Keymaster
    June 19, 2017 at 8:56 am
    Post count: 2971
    #18713 Reply |

    Hello Andrea，
    #200188 can be connect with battery that is less than 12V 20Ah.
    Best regads.

    alessandro
    July 26, 2017 at 3:38 pm
    Post count: 0
    #19851 Reply |

    a simple question: the cables included to connect the battery are terminated with faston plug. the size of faston plug is 4.8 or 6.3mm?
    thks

    Drok
    Keymaster
    July 27, 2017 at 9:17 am
    Post count: 2971
    #19872 Reply |

    Hello alessandro,
    Thanks for writing in.
    Could you please tell us which item you are talking about? You can send us the ASIN number or product link. And please kindly show us the part you mean.
    We will reply to you once we confirm the item.
    Best regards.

    alessandro
    July 31, 2017 at 8:43 am
    Post count: 0
    #20002 Reply |

    the model is 200188_EU. in amazon site with ASIN B01K95M78K.
    I already bought LM2596S model 2000217_EU (ASIN B01MT7W3RX) to work together.
    about the last card, double connectors are available in input and in output. I suppose that only one is accepted for input; the same for output , isn’t it?

    Spike
    September 3, 2017 at 11:31 am
    Post count: 0
    #21328 Reply |

    Good day!

    Regarding “DEOK UPS Uninterruptible Power Supply AC 110V/220V Voltage Regulator Charging Module 240v ” from Amazon – can you tell me please what the terminal marked “C” next to the dc output is.

    Also, there is a four-pin header marked “CN1” – what is this used for please.

    Thank you

    Drok
    Keymaster
    September 5, 2017 at 9:30 am
    Post count: 2971
    #21433 Reply |

    Hello Spike,
    Thanks for writing in.
    Actually, you don’t need to think about “C “terminals. It doesn’t have any function, which is designed for some special customization.
    The wiring diagram is as followed.
    090102
    Best regards.

    Spike
    September 8, 2017 at 6:01 pm
    Post count: 0
    #21560 Reply |

    Thank you!

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)
Reply To: AC 110V-240V switch power supply with battery interface AC-DC 10A #200188_EU
Your information: