You are here:>>Display and Control Mounting for Boost Converter
Display and Control Mounting for Boost Converter 2016-07-11T01:40:27+00:00

Home › Forums › Voltage Regulator Support › Display and Control Mounting for Boost Converter

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • Matt
    July 11, 2016 at 1:40 am
    Post count: 0
    #6279 Reply |

    I recently purchased a DROK® Numerical Control Voltage Regulator DC 8-60V to 10-120V 15A Boost Converter on Amazon. I’m quite pleased with it’s performance and capabilities.

    I would like to be able to mount the control/display module in a panel. I wish there were a mounting frame/bezel available. Also, Is the onboard serial interface useful for connecting to a remote display and/or control?

    Drok
    Keymaster
    July 11, 2016 at 4:05 am
    Post count: 2971
    #6291 Reply |

    Hello Matt,
    Thank you for writing in.
    Here is the dimension for this product.
    Dimension_200150

    The onboard serial interface cannot be connected to a remote display or control.
    Beg your understanding.
    Hope this can help you.
    Best regards

    Pete
    September 7, 2016 at 2:08 pm
    Post count: 0
    #8287 Reply |

    Just received — DROK® Numerical Control Voltage Regulator DC 8-60V to 10-120V 15A Boost Converter, Constant Voltage Current Step Up Module Adjustable Output 48V 24V 12V DC Power Supply with LED Display

    Where are the instructions / manual -to- operate / use the unit…?

    Shame you put all this effort to design and produce the unit.
    But failed to finish doing the paper work…!

    Drok
    Keymaster
    September 8, 2016 at 3:01 am
    Post count: 2971
    #8319 Reply |

    Hello Pete,
    Thank you for writing in and so sorry for the inconvenience caused on you.
    Here the PDF file is the instruction of the product, please check it.
    Instruction_200150
    Beg your forgiveness and hope this can help you.
    Best regards

    Pete
    September 8, 2016 at 8:07 am
    Post count: 0
    #8331 Reply |

    Regarding paper work for — DROK® Numerical Control Voltage Regulator DC 8-60V to 10-120V 15A Boost Converter, Constant Voltage Current Step Up Module Adjustable Output 48V 24V 12V DC Power Supply with LED Display

    Followed the Instruction_200150 link — that hit the spot, right on…!

    Kindly consider adding this (new?) product to your — DC to DC Boost Converter Step Up Voltage Regulator Sheet — http://www.droking.com/dc-to-dc-boost-converter-step-up-voltage-regulator-sheet/

    And to add a manual Instruction_XXXXXX link as a column for all your products.

    Thanks for quick reply and instructions…
    Appreciated… Have a good day
    Pete…R…

    Drok
    Keymaster
    September 9, 2016 at 2:41 am
    Post count: 2971
    #8362 Reply |

    Hello Pete,
    You’re welcome.
    If there is any questions, please feel free to contact us.
    Best regards

    Jim Beans
    September 25, 2017 at 8:31 am
    Post count: 0
    #22329 Reply |

    Hi Drok, can you tell me if this boost unit works with the serial connection? And do you have documentation for that? Thank you.

    Drok
    Keymaster
    September 26, 2017 at 3:28 am
    Post count: 2971
    #22340 Reply |

    Hello Jim Beans，
    Do you mean the above item#200150?
    https://www.amazon.com/dp/B01GFVI6R6
    This item can’t work with serial connection. For any more questions, just feel free to contact us.
    Best regards.

    Jim Beans
    October 5, 2017 at 11:21 am
    Post count: 0
    #22628 Reply |

    Yes, the item DR-US200150.

     

    What items does DROK sell that have a working serial port? Thank you.

    Drok
    Keymaster
    October 10, 2017 at 7:57 am
    Post count: 2971
    #22960 Reply |

    Hello Jim Beans,
    This buck converter has serial port. https://www.amazon.com/dp/B071LGTTRN
    But what you need should be a boost converter. We are sorry so far our boost converter doesn’t have serial port. Hope you can understand.
    Best regards

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
Reply To: Display and Control Mounting for Boost Converter
Your information: