DROK DC 6.5-100V, external supply?

[Simon October 10, 2016 at 8:35 pm Post count: 0]

#9641 Reply |

Hi, thanks for your great Product, I have good experience with the DROK Digital Multimeter DC 6.5-100V.

In my recent application I would like to measure Voltage below 6.5V, would that be possible with an external supply of the Multimeter.
Probably only with a ‘hack’, opening the housing and connecting to the supply.
Can you provide me some information? I’m aware of loosing any warranty, but would appreciate your support.
Making chances on the board (soldering, change wiring) would be reasonable effort to me.

Thanks
Simon

[DrokKeymaster October 13, 2016 at 8:36 am Post count: 2971]

#9753 Reply |

Hello Simon,
Thank you for writing in.
Could you please tell us your order ID or the link of the product so that we can ensure which product you are referring to?
Looking forward to hearing from you.
Best regards

[Simon November 11, 2016 at 1:34 pm Post count: 0]

#10517 Reply |

Hi,
the product I am referring to is:
https://www.amazon.com/gp/product/B017BDQHE6/ref=as_li_tl?tag=proeng-20&keywords=digital+multimeter

DROK Digital Multimeter DC 6.5-100V 100A Voltage Amperage Power Energy Meter.

Sorry for late my response. The question is still relevant.
Best regards
Simon

[DrokKeymaster November 14, 2016 at 3:41 am Post count: 2971]

#10561 Reply |

Hello Simon,
Thank you for your reply.
The measured voltage range of this product is DC 6.5-100V.
It is not able to measure below 6.5V.
The measured voltage range is set by program so it is hard to change it.
Hope you can understand.
Best regards

[Author]

Posts