You are here:>>JS-C33 Programming submenus 2 & 3
JS-C33 Programming submenus 2 & 3 2019-07-15T12:07:33+00:00

Home Forums Advice JS-C33 Programming submenus 2 & 3

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Ramon L Collazo
    Post count: 0

    Hello. In submenu 2, is the delay the time that the display stays on?

    In submenu 3, what does the right side mean? Is it a voltage or a percentage? What does “upper voltage” mean?  The default is the same on both sides, so this is invalid according to the instructions. What are the settings for a standard car 12V battery?

    Drok
    Keymaster
    Post count: 2948

    Hello Ramon L Collazo,

    Thanks for writing in.

    As per your inforamtion, it shoud be 2001710003

    Submenu 2 is for delayed shutdown. If you set delayed time, meter will turn off after that time.

    If your 12v battery is leacd-acid type, please set P12v in submenu 1.

    Submenu 3 is custom setting. Some battery specifications are not available  in Submenu 1, then you can choose submenu 3.

    You just need to set minimum voltage and maximum voltage for your battery.  Hope that can help you.

    Best regards

     

     

    Neil Hovdestad
    Post count: 0

    I am unsure what to program setting 3.

    I have an application using 10 6 volt lead acid batteries.

    What do you suggest I set it to?

    Thanks

    Drok
    Keymaster
    Post count: 2948

    Hello Neil Hovdestad,

    Are you talking about 2001710003? You can program menu 1 or menu 3, both are for battery type setting.

    Menu 3 is custom setting, which is suitable for any battery type. You have to set a minimum and maximum voltage for battery.

    Best regards.

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: JS-C33 Programming submenus 2 & 3
Your information: