You are here:>>Reducing the RPM of the Grinder
Reducing the RPM of the Grinder 2019-03-10T00:40:18+00:00

Home › Forums › Voltage Regulator Support › Reducing the RPM of the Grinder

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Jean Perreault
    March 10, 2019 at 12:40 am
    Post count: 0
    #35669 Reply |

    Hi,

    Could ( Your Product; purchase at Amazon.ca and listed below) be used with an ” AC – 110 volts grinder ” to lower the RPM of the grinder ?

    ” DROK Micro AC 110V 4000W Voltage Regulator  SCR 110VAC Dimmer Speed Controller ”

    Thank you,

    Jean Perreault

     

    Drok
    Keymaster
    March 10, 2019 at 8:42 am
    Post count: 2971
    #35671 Reply |

    Hello Jean Perreault，

    Do you mean “-110v” or “110v”? Input voltage can be AC 110V to 220V. If your grinder use AC 110v power supply, it should be able to control speed.

    Best regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Reducing the RPM of the Grinder
Your information: