You are here:>>Thank you!
Thank you! 2018-06-28T16:08:29+00:00

Home › Forums › Voltage Regulator Support › Thank you!

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Paul
    June 28, 2018 at 4:08 pm
    Post count: 0
    #29924 Reply |

    About a month ago I posted a problem with my DC 10-75V to DC 0-60V 12A 720W Step Down converter.  It was producing zero output.  I asked what component might have failed, and you told me Q1 was the likely problem.  I replaced that MOSFET, and now the converter works perfectly again.

    I want to THANK YOU VERY MUCH!!!  This is the kind of service that will make your company continue with its success.

    –Paul

    p.s.  I’ve been looking for an enclosure that would work nicely for this converter.  Do you have any suggestions?  Thank you.

    Drok
    Keymaster
    June 29, 2018 at 9:12 am
    Post count: 2971
    #29929 Reply |

    Hello Paul，

    We’re glad we can help with you.

    There is no specific  enclosure for it. You can find some base on practical situation.

    Best regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Thank you!
Your information: