You are here:>>What connectors to use for input/ouput on Wire-less Voltage Regulator
What connectors to use for input/ouput on Wire-less Voltage Regulator 2020-05-30T17:53:58+00:00

Home › Forums › Voltage Regulator Support › What connectors to use for input/ouput on Wire-less Voltage Regulator

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • Charles Arias
    May 30, 2020 at 5:53 pm
    Post count: 0
    #39006 Reply |

    Hello,

    What connectors do you recommend to use on the input/output connections for the main module of Wire-less Voltage Regulator DC 0-75V to 0-60V 8A Programmable Numerical Controller Buck Boost Converter? They are screw down type, and about 5mm wide.

    Drok
    Keymaster
    May 31, 2020 at 6:44 am
    Post count: 2971
    #39030 Reply |

    Hello Charles Arias,
    Please check if it is this item.
    https://www.droking.com/wire-less-voltage-regulator-dc-0-75v-to-0-60v-8a-programmable-numerical-controller-buck-boost-converter?search=Programmable%20&description=true
    It is screw terminal, you can connect lead wire directly.
    Best regards,
    DROK

    Charles Arias
    May 31, 2020 at 8:53 pm
    Post count: 0
    #39055 Reply |

    Hi Drok,

    Yes, it is that item.  I managed to create secure connectors, thanks!

    I am looking for  a manual for its use, does one exist?

    I would like to use this for using one battery to charge another in the field.  Right now, I have connected a 42V battery on input, and want to boost voltage to 50.4V to charge another battery on output.  I believe I have everything set correctly, however it is not boosting voltage to 50.4 as desired, the display stays at the inputs current voltage (40.5V) and never goes up.  Please advise.

    Drok
    Keymaster
    June 1, 2020 at 6:49 am
    Post count: 2971
    #39071 Reply |

    Hello Charles Arias，

    Here is manual, https://m.media-amazon.com/images/I/D17WUm-4+fS.pdf

    If it still not work, would you like to show us your operation by video?

    Best regards,

    DROK

    Drok
    Keymaster
    June 1, 2020 at 8:00 am
    Post count: 2971
    #39076 Reply |

    Hello,

    Just check with factory, actually there is misunderstanding. It should be buck converter. We are terribly sorry for that.

    We will correct it as soon as possible.  And we would like to issue half of refund as compensation, is it ok for you?

    Best regards.

    Charles Arias
    June 1, 2020 at 12:14 pm
    Post count: 0
    #39082 Reply |

    Hi Drok,

    Yes, that will be fine.  I already ordered another boost converter to do what I needed from you through Amazon

    Drok
    Keymaster
    June 2, 2020 at 7:38 am
    Post count: 2971
    #39107 Reply |

    Hello,

    Could you plesae kindly offer order ID?

    Best regards,

    DROK

    Charles Arias
    June 2, 2020 at 1:54 pm
    Post count: 0
    #39121 Reply |
    This reply has been marked as private.
    Drok
    Keymaster
    June 3, 2020 at 8:54 am
    Post count: 2971
    #39151 Reply |

    Hello Charles Arias,

    We have processed refund for this order. Please check it later.

    Best regards,

    DROK

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
Reply To: What connectors to use for input/ouput on Wire-less Voltage Regulator
Your information: