Anyone can tell me that what are three readings on this meter maenad: one is at upright corner(show AH), second one is at bottom right corner(shown W) and third is at left bottom corner(also shown W). Also there were + and – signs associated with it. There was a “battery bar” at upper left corner, how it can be programmed to reflex real capacity. Thanks.
on my WLS-PVA200 I reset the current and with no flow (nothing going through the loop) it shows .02, shouldn’t it be “0”? When I put the load in it does show a reading however it is not accurate, it reads very low. I put a Fluke ammeter on to check it. for example the fluke shows .8 and the DROK shows .4. as the actual load increases the difference increases.
Je connais un peu ce type d’appareil, ça peut être déroutant au début avec toutes les unités et symboles. L’autre jour, après avoir bidouillé avec mes gadgets, j’ai pris une petite pause sur https://win-auras.fr. Les bonus pour les joueurs français rendent le moment encore plus agréable. Quelques minutes suffisent pour se détendre avant de revenir aux réglages techniques.
chung nieh
Dave Williams
Bob
davidhamilton