It is a 100W Adapter/Driver Module/Car Power Supply, Input voltage: DC 10~32V, Output voltage: DC 12~35V (adjustable), Output Current: 5A (MAX), Application: DIY Power adapter/Charger, industrial equipments, electronic equipment, Communications Equipment, Power Tools, Car Driving Recorder, Car GPS, Car audio, LCD TV, Advertising screen, Monitoring System, LED lights, Fan, intercom and monitor system, etc.Feature:
- Module Properties: non-isolated step-up module (BOOST)
- Input voltage: DC 10~32V
- Output voltage: DC 12~35V (adjustable)
- Output Current: 5A (MAX)
- Input Current: 10A (MAX)
- Output power: natural cooling 100W (MAX), enhance heat dissipation 120W (MAX)
- Easy to drive 65W 90W dual-core notebook.
- Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45°c
- Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A)
- Output Ripple: 2% (MAX) 20M-bandwidth
- Operating Temperature: Industrial (-40°c to +85°c) (ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation)
- Full load temperature rise: 45°c
- No-load current: 25mA typical
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
- Input Reverse Polarity Protection: None (Please Series diode at the input port.)
- 1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage.
- 2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.
- 1 x 100W Boost Converter( Power Supply Module/Voltage Regulator/Adapter )