It is a Digital Temp Controller,Temperature control range:-50~110 °c,Resolution: 0.1 °c (-9.9°c to 99.9 °c), 1 °c (other range),Measurement accuracy: 0.1 °c.
Technical Parameters:
-
Temperature control range:-50~110 °c
-
Input Power: DC 12V
-
Resolution: 0.1 °c (-9.9°c to 99.9 °c), 1 °c (other range)
-
Measurement accuracy: 0.1 °c
-
Backlash accuracy: 0.1 °c
-
Control accuracy: 0.1 °c
-
Output: 1 relay output, capacity = 10A
-
Measuring inputs: NTC (10K 0.5%) Waterproof sensor
-
Power consumption: Static current: < / = 35MA; Attract current: < / = 65MA
-
Refresh rate: 0.5 s
-
Size: 48.5*40.5
Instructions for use:
-
Connect
the power supply and equipment, the measuring temperature is displayed,
press the "SET" button, press " + or - " to set the desired
temperature (long press " + or - " to quickly increase or decrease),
press "SET" to confirm the setting and return, controller automatically
performs the relay ON/OFF.the thermostat output is 10A relay, meet a
variety of high-power loads,
-
LED Indicator: LED off indicates the relay off; Lighting,indicates the relay is closed.
-
Digital
LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the
relay will be forcibly disconnected; "---" indicates high temperature
alarm
-
Long press the "SET" button to enter the main menu
settings, press " + or - " to switching between P0-P6,then long press
"SET" or 10 seconds without keystrokes to confirm the setting and
return.
Buttons:
-
P0 :Cooling / Heating; Range: C/H; Default: C
-
P1 :Hysteresis Setting; Range:0.1-15; Default: 2
-
P2 :Highest Setting Limit; Range:110; Default: 110
-
P3: Lowest setting Limit; Range:-50; Default: -50
-
P4 :Temperature Correction; Range:-7-7°c; Default: 0°c
-
P5: Delay Start Time; Range:0-10 Minute; Default: 0
-
P6: High temperature alarm; Range:0-110; Default: Off
-
When the Thermostat is power off, long press "- or +", you can restore the factory settings
Package Include:
-
1x Digital Temp Controller