You are here:>>200354 volume knob location
200354 volume knob location 2019-03-25T13:49:29+00:00

Home › Forums › Any Other Products › 200354 volume knob location

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • David
    March 25, 2019 at 1:49 pm
    Post count: 0
    #35717 Reply |

    Good morning,

    I bought the 35W x 35W amplifier board last week to use in a Bluetooth stereo I built.  The amplifier worked fantastic, and produced amazing sound!  The problem was that I couldn’t mount the amp in my stereo because the volume knob is too far back from the edge of the board.  The front edge of the board bumped into the mounting face before the threads of the volume knob shaft made it through the hole.  I tried removing some of the front end of the printed circuit board and ended up ruining the board.  I now have to choose between a mounted board or a working board.

    How do I know if I buy another board that it will have solved the problem?

    Drok
    Keymaster
    March 26, 2019 at 9:45 am
    Post count: 2971
    #35721 Reply |

    Hello David,

    It’s regretted to hear that. If the size of amplifier board doesn’t match your mounting face, it is hard to make it. You can only revise mounting face in case damage the board.

    And we are not sure exactly how it is now. Could you please show that status by images?

    You can upload picutre here or send it to service@droking.com.

    Best regards.

     

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: 200354 volume knob location
Your information: