You are here:>>Battery reads empty
Battery reads empty 2020-09-10T06:38:39+00:00

Home › Forums › Advice › Battery reads empty

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Clint
    September 10, 2020 at 6:38 am
    Post count: 0
    #45960 Reply |

    I have the DROK Digital Multimeter Charge-discharge tester, 0-90V, 0-20A. I have the negative from the battery going through a switch and into the Multimeter (-). I have the positive going from the battery through a fuse box, through the switch, and into the Multimeter (+). I have tried both the “out” and “in” connection posts. The battery is a 35Ah Sealed Lead Acid.

    I programmed the OAH to 35.

    The multimeter is reading 0% on the battery and the icon is empty.

    What am I doing wrong?

    Thank you for your assistance. I look forward to working together to solve this issue.

    Clint

    Drok
    Keymaster
    September 10, 2020 at 9:40 am
    Post count: 2971
    #45973 Reply |

    Hello Clint,

    Could you please check if it is below item? #200320

    https://www.amazon.com/dp/B0744GQQR4/ref=as_li_tl?tag=proeng-20

    We are not sure the Multimeter (+) and Multimeter (-) you mentioned.  Do you mean VCC+ and OUT-? And what is the load?

    Battery icon is not regarding actual battery capacity.

    Capacity percentage=( accumulated AH value /preset AH value)*100%

    Best regards,

    DROK

    • This reply was modified 3 years, 7 months ago by  Drok.
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Battery reads empty
Your information: