Boost/buck transformer won't boost.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
Tyson Mitchell
March 14, 2021 at 9:57 pm

Post count: 0

#63492 Reply |

Hello, I got a 6-65v input to 0-60v output LCD display boost buck transformer. I am trying to take an input of 6v and get a 14v out put. The transformer will not bring voltage past 6v. I have the transformer hooked up to a DC power supply ready 6v and the output to a multi meter

Drok
Keymaster

March 15, 2021 at 7:22 am

Post count: 2971

#63541 Reply |

Hello Tyson Mitchell，

It is hard to confirm which item it is, would you like to offer product link or SKU number?

Best regards,

DROK

synaptic
April 2, 2021 at 8:10 pm

Post count: 0

#65677 Reply |

I’m running into the same thing, it’s strange. I actually got out a brand new one thinking the other was faulty but they’re both doing it.

I’m using an ATX power supply breakout board, feeding it 12V, and want to boost to 60V but the output is the same as the input. Does it require the load to be attached? I’m just hooking the DMM to the output terminals to validate currently.

Bucks great, why won’t it boost?

synaptic
April 2, 2021 at 8:17 pm

Post count: 0

#65679 Reply |

This is SKU 200220 according to the instructions in the box.

6-65V input, 0-60V output, 0-8A output, 0-400W output

I provide 12V input and there’s 29A available from this power supply. I want to boost it to 60V. It still outputs 12V. What could be wrong?

synaptic
April 2, 2021 at 8:47 pm

Post count: 0

#65681 Reply |

Ah nevermind, I see this is somehow only a buck converter when I could have sworn it was a boost/buck converter.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)