You are here:>>Buck converter controlled by raspberry pi or arduino?
Buck converter controlled by raspberry pi or arduino? 2020-11-13T04:54:49+00:00

Home › Forums › Voltage Regulator Support › Buck converter controlled by raspberry pi or arduino?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Steve
    November 13, 2020 at 4:54 am
    Post count: 0
    #52194 Reply |

    Hi,

    I bought two different kinds of Drok buck boost converters, one of them is the USB pc controlled version.

    Is there nothing that can be controlled by raspberry pi PWM or Arduino PWM?? so I can control from my own code?

    Maybe there is a voltage regulator but all the LM317 circuits only go down to 1 Volt.

    My signal output requirements are 0V to 5 V at 100 mA.  I could get away with 0.5 V to 4.5 V at 100 mA.

    Drok
    Keymaster
    November 16, 2020 at 7:17 am
    Post count: 2971
    #52400 Reply |

    Hello Steve，

    Though we can’t confirm which items you bought, for now, there are no voltage converters that can be controled by PWM.

    Best regards,

    DROK

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Buck converter controlled by raspberry pi or arduino?
Your information: