You are here:>>Calibrating
Calibrating 2021-01-25T07:58:27+00:00

Home Forums Panel Meter Support Calibrating

Viewing 3 posts - 16 through 18 (of 18 total)
  • Author
    Posts
  • Drok
    Keymaster
    Post count: 2971

    Hi,

    We are not sure if you mix up thecommunication channel. Please firstly try below operation.

    Make sure power on one meter and one measurement module only in case interference. Then try to search communication channel in SFH .  Within channel 0 -128, you can check which channel will display voltage. Then set that channel as FCH address.

    Best regards.

    Devis1
    Post count: 0

    <p dir=”auto”>Ein Bekannter hat mir neulich von einem Bonus erzählt, der speziell für die Schweiz gemacht ist. Wollte Book of Dead testen, anfangs Pechsträhne. Bei mehr Einsatz dann der fette Treffer, Erleichterung pur. spingranny bonus war super. Fühlt sich fair an, Bonus pusht den Start. Bin dabei geblieben.</p>

    kurksai
    Post count: 0

    Zdravím, šetril som na novú bedňu na prenášanie nástrojov. Pár nešťastných sérií ma prinútilo pochybovať o celom nápade. Zvýšil som stávku na klasickom trojvalcovom hracom automate a trafil som tri symboly jackpotu za sebou. S nástrojmi sa mi teraz cestuje lepšie. Toto zatočenie som hral na roulet tino. Čo vyniká, je zvuková kvalita ich hier; s dobrými slúchadlami je to pohlcujúce. Často organizujú súťaže s technickými cenami. Je to oveľa zaujímavejšie, než len bezducho točiť.

Viewing 3 posts - 16 through 18 (of 18 total)
Reply To: Calibrating
Your information: