<p dir=”auto”>Ein Bekannter hat mir neulich von einem Bonus erzählt, der speziell für die Schweiz gemacht ist. Wollte Book of Dead testen, anfangs Pechsträhne. Bei mehr Einsatz dann der fette Treffer, Erleichterung pur. spingranny bonus war super. Fühlt sich fair an, Bonus pusht den Start. Bin dabei geblieben.</p>

<p class=”PDq2pG_selectionAnchorContainer” data-start=”0″ data-end=”344″>It sounds like the meter may be reading the charger’s maintenance current as a constant load, which can throw off the capacity calculation. Some VAC8010F units allow calibration through the setup menu, but the exact steps depend on the firmware version. It’s worth checking the manual for current offset or zero-point calibration options first.</p>
<p data-start=”346″ data-end=”605″>Before recalibrating, try disconnecting all loads and the charger, then reset the meter and fully charge the battery again. Also make sure the shunt is installed correctly and that the charger current is not flowing on the wrong side of the measurement point.</p>
<p data-start=”607″ data-end=”945″ data-is-last-node=”” data-is-only-node=””>A small standby current after charging is normal for many chargers, but a continuous 1A reading does seem high if nothing else is connected. Testing with another meter can help confirm whether the issue is with the VAC8010F or the charger itself. For more useful tech discussions and guides, you can also check https://thor-fortunes.net/.</p>