You are here:>>DC Converter no Output Current?
DC Converter no Output Current? 2016-10-12T19:39:15+00:00

Home › Forums › Voltage Regulator Support › DC Converter no Output Current?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Khaatim Gatlin
    October 12, 2016 at 7:39 pm
    Post count: 0
    #9737 Reply |

    Hi, I recently started working with this product: https://www.amazon.com/gp/product/B01FCY4JFU/ref=as_li_tl?tag=proeng-20&keywords=voltage%2Bregulator&th=1

    I followed setup instructions but I have no output current (it stays at 0 amps no matter HOW MUCH I SCREW CLOCKWISE) and upon being disconnected from a power source my chip does not power on. I can set my voltage fine and the lcd display works, and I can set my mode.

    I feel as if I got sent a defective chip.

    I am trying to use this product with a Raspberry Pi 3 and a 12V battery.I have two wires coming from my battery to the chip, that is all.

    Also would it be possible to get a datasheet for this product?

    Drok
    Keymaster
    October 13, 2016 at 9:44 am
    Post count: 2971
    #9759 Reply |

    Hello Khaatim Gatlin,
    Thank you for writing in and so sorry for the inconvenience caused on you.
    Could you please tell us more details of your operation, such as the input voltage/current, the load, the wiring, the load, the working environment?
    If you can, we sincerely hope that you can send us some images to let us check the problem details.
    With your help, we can find a solution more quickly.
    Best regards

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: DC Converter no Output Current?
Your information: