You are here:>>Disable Voltage Display on LM2596
Disable Voltage Display on LM2596 2015-09-14T07:32:22+00:00

Home › Forums › Voltage Regulator Support › Disable Voltage Display on LM2596

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Larry
    September 14, 2015 at 7:32 am
    Post count: 0
    #1932 Reply |

    Hello,

    On the version of the LM2596 buck regulator I have, I’m unable to see how to disable the voltage readout LEDs. I’ve tried holding all the various buttons in for different periods of time, but to no avail. There is no “P3” jumper as indicated in the datasheet that came with the device.

    The issue is that the display is powered off the input voltage via a tiny regulator. It’s drawing around 40mA with an input of 37V (device is rated to 40V). That little guy is dropping 37-3 = 34V @ 40mA = 1.36W! That’s why these regulators get so hot with high input voltages even with no load on the output. I’m hoping that by disabling the LED display it’ll drop the current down through the regulator and keep things cooler.

    Thanks in advance for you help.

    Larry

    Drok
    Keymaster
    September 14, 2015 at 7:54 am
    Post count: 2971
    #1936 Reply |

    hi, could you please send us the link of the product you had?? best regards

    Larry
    September 14, 2015 at 5:13 pm
    Post count: 0
    #1976 Reply |

    Here’s the link:

    LM2596 Based Regulator

    SKU: 090029

    Thank you,
    Larry

    Drok
    Keymaster
    September 15, 2015 at 3:50 am
    Post count: 2971
    #1977 Reply |

    hi, friend,
    thanks for your reply.
    we are sorry there is no way to disable the voltage readout LEDs. but maybe you can add a fan to dissipating heat.
    could you please take a picture of the item you have??
    and what circumstances fever overheating???
    waiting your reply.
    best regards

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: Disable Voltage Display on LM2596
Your information: