You are here:>>DOEK 8A/100W DC Buck Converter – flashing
DOEK 8A/100W DC Buck Converter – flashing 2015-11-04T23:54:45+00:00

Home › Forums › Voltage Regulator Support › DOEK 8A/100W DC Buck Converter – flashing

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Alvin
    November 4, 2015 at 11:54 pm
    Post count: 0
    #2297 Reply |

    Hi,

    Im trying to use this device to power a large set of 12v LEDs but when I use it both the green LED on the unit and the Other LEDS flash.

    Any idea what Im doing wrong or why that would flash?

    Thanks

    Alvin

    Drok
    Keymaster
    November 5, 2015 at 2:43 am
    Post count: 2971
    #2301 Reply |

    Hi Alvin,
    Did you get this 8A 100W Converter? What’s your input voltage and what’s the amps of your power supply? and then what’s the watt of the LEDs?
    Looking forward to your reply.
    Thanks!
    DROK

    Bob Sposato
    November 16, 2015 at 6:01 pm
    Post count: 0
    #2408 Reply |

    I have:
    DROK® 200W/12A DC Buck Converter
    I need a wiring diagram!
    Thanks

    Drok
    Keymaster
    November 19, 2015 at 2:48 am
    Post count: 2971
    #2432 Reply |

    Dear Bob Sposato, below the wiring instruction:
    300166_wiring-instruction
    Any other questions, don’t hesitate to write back to us.

    Best regards,
    DROK

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: DOEK 8A/100W DC Buck Converter – flashing
Your information: