HI … THE BATTERY CAPACITY ITS OKAYHH IF DISCHARGING ….AFTER CHARGER CONNECTED ITS GO STRAIGHT TO 100% IN A SECOND…WHY THIS PROBLEM…if I HAVE 50% BATTERY I SET TO 100AH OAH..MY BATTERY 12V 100AH …AFTER CONNECT POWER SUPPLY TO CHARGE BATTERY ITS GO STRAIGHT TO 100% …PLS ANY SUGGESTION
I tried to reset AH & WH totals on my vac9010. Somehow the meter got currupted and the current was no longer showing. I worked through the calibration procedure and all is well. I cannot reset the totals and don’t want to repeat the same mistake. Is there an easy straight forward way of doing this?
Do you mean an easy way to calibrate current or reset AH? There are no other ways to calibrate current and voltage.
If you want to reset AH, please move the yellow cursor to “LOP”, once the yellow cursor is invsible,just short press button OK , then the time will be cleared, the AH value will be zeroed or filled.
After powering off, WH will be cleared automatically.
Kumar
John Watkins