You are here:>>DROK® Battery Capacity Tester Indicator Monitor Meter
DROK® Battery Capacity Tester Indicator Monitor Meter 2015-10-29T14:42:39+00:00

Home › Forums › Voltage Regulator Support › DROK® Battery Capacity Tester Indicator Monitor Meter

Tagged: ,

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • Isaac Atison
    October 29, 2015 at 2:42 pm
    Post count: 0
    #2167 Reply |

    Hello team,

    I purchase DROK® Battery Capacity Tester Indicator Monitor Meter for 12V – 48V Lead-acid Lithium Batteries LCD Panel Display for my gel lithium 12v 200AH battery for my inverter system. my DROK® Battery Capacity Tester Indicator Monitor is unable to detect the batter and i am not able to setup. Kindly give me step by step procedure to enable the battery tester to detect the battery and calibrate the battery tester.

    Thank you

    Br//Isaac

    Drok
    Keymaster
    October 30, 2015 at 1:40 am
    Post count: 2971
    #2170 Reply |

    Hi, thank you for your business. you bought the ” Pb12V lead-acid battery” Size Battery Capacity Tester, right? Please note that this is used for Pb12V lead-acid battery, so it cannot monitor your gel lithium 12v 200AH battery. If you want to test it, you should choose the ” 3 pcs lithium batteries 12V” size. Any queries should you have pls feel free to contact us！Thanks.

    Isaac Atison
    November 1, 2015 at 12:25 pm
    Post count: 0
    #2214 Reply |

    i am unable to press the ok button in front to move to the next option

    Isaac Atison
    November 1, 2015 at 12:28 pm
    Post count: 0
    #2215 Reply |

    can it be use to test 200AH lithium batteries ? if yes kindly give me the procedure?

    Drok
    Keymaster
    November 4, 2015 at 7:00 am
    Post count: 2971
    #2289 Reply |

    Hi, sorry for the misunderstanding. The “OK” button just used to control the screen back light, it cannot select the option. Please follow the steps:
    1) Power off the indicator
    2) Press and hold Kdn key
    3) Power on the indicator
    4) Release Kdn key，then the screen will display “Pbx” or “Lix” (Pb is lead-acid; Li is lithium battery; X is the number of cells), then use ↑ Kup and ↓ Kdn to select battery types.—-Li3
    Please reply us if it still cannot work and tell us your order ID.
    Thanks!
    DROK

    Isaac Atison
    November 5, 2015 at 9:45 am
    Post count: 0
    #2305 Reply |

    i have been able to do the above but i want to proceed to the next level where i will be able to use the Kup option and set the BALWAY

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: DROK® Battery Capacity Tester Indicator Monitor Meter
Your information: