You are here:>>DROK DC Voltmeter Ammeter, 0-90V 100A with hall effect sensor
DROK DC Voltmeter Ammeter, 0-90V 100A with hall effect sensor 2021-09-27T19:24:32+00:00

Home › Forums › Panel Meter Support › DROK DC Voltmeter Ammeter, 0-90V 100A with hall effect sensor

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Mark
    September 27, 2021 at 7:24 pm
    Post count: 0
    #81740 Reply |

    I’ve had this device for a couple of years: https://smile.amazon.com/gp/product/B07W1W3X7D

    It correctly shows instantaneous current and voltage, but it always shows the state of charge as 100%, and the kWh and Ah readings show numbers that are 5-6 times the actually battery capacity. How can I get this to work correctly? Thanks!

    Drok
    Keymaster
    September 29, 2021 at 8:21 am
    Post count: 2971
    #81848 Reply |

    Hello,

    Battery capacity is set manually. It will not check battery capacity automatically. The percentage = (actual charging or discharging AH value /preset AH value)*100%.  Please set battery capacity in OAH menu.

    To reset AH,  please move the yellow cursor down to “LOP”  and then press the down button. When the yellow cursor  is invisible, please press OK button to clear or fill up AH value.

    Best regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: DROK DC Voltmeter Ammeter, 0-90V 100A with hall effect sensor
Your information: