You are here:>>Drok ltc 1871
Drok ltc 1871 2015-07-08T13:13:11+00:00

Home Forums Advice Drok ltc 1871

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • Dan W
    Post count: 0

    Can this be used on a 6v pos grnd system? It will be isolated from the chassis.

    Drok
    Keymaster
    Post count: 2971

    dear friend

    ltc 1871 input/output is common ground. so it should can work with your 6v pos ground system.

    best regards

    • This reply was modified 8 years, 5 months ago by  Drok.
    John Sibilio
    Post count: 0

    hello,

    it seem the temp sensor has an issue going below 28C for the high.

    i building something for a turtle tank 28c is to too high for the temp

    the temp of the turtle need to be around 22.5 c for the low and 24.5c for the high

    can you please assist!

    Regards,

    John Sibilio

    Drok
    Keymaster
    Post count: 2971

    hi, John

    maybe this thermostat can help you.

    best regards

    Ron
    Post count: 0

    Hi maybe i don’t under stand fully how it works.
    But let me try to explain.
    I’m connecting a 5v arduino to ltc 1871 5v to 12v step up.
    When I don’t connect to the output. The led lights up and says its 4.9.
    But as soon as I connect to the output an electromagnet that requires 12v.
    It seems to stop working until I remove the load from the output.

    I’m confused

Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: Drok ltc 1871
Your information: