You are here:>>Improper voltage adjustments on 600W Boost Converter
Improper voltage adjustments on 600W Boost Converter 2016-11-01T04:21:58+00:00

Home › Forums › Voltage Regulator Support › Improper voltage adjustments on 600W Boost Converter

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Cameron
    November 1, 2016 at 4:21 am
    Post count: 0
    #10166 Reply |

    I recently purchased the 600W boost converter on amazon: https://www.amazon.com/dp/B00E8D7XYG/ref=cm_sw_r_cp_api_

    …and I had trouble achieving the correct output voltage. My input voltage is about 23 volts and i am aiming for an output of 25.2 volts and a current of 10 amps, however the lowest the voltage that it will adjust to is 33.8 volts. Is my converter defective?

    Drok
    Keymaster
    November 3, 2016 at 1:57 am
    Post count: 2971
    #10246 Reply |

    Hello Cameron,
    Thank you for writing in.
    Have you tried to adjust the output voltage regulation potentiometer?
    If not, please try to counter-clockwise adjust the potentiometer to see whether the output voltage reduce to 25.2V or not.
    Hope this can help you.
    Best regards

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Improper voltage adjustments on 600W Boost Converter
Your information: