You are here:>>Instructions for #200186 35Watt USB power meter-especially calibration
Instructions for #200186 35Watt USB power meter-especially calibration 2021-07-14T04:06:13+00:00

Home › Forums › Any Other Products › Instructions for #200186 35Watt USB power meter-especially calibration

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • David
    July 14, 2021 at 4:06 am
    Post count: 0
    #76390 Reply |

    Hello,

    I have heard that there is an extended button press sequence to calibrate Voltage and Current measurements.  Could you please send instructions?

    Also wondering about function of the “reserved DIY terminal voltage input”.  are these terminal for bare-wire connections for Electronic Load testing?

    Thank you

    Drok
    Keymaster
    July 15, 2021 at 6:58 am
    Post count: 2971
    #76484 Reply |

    Hello,

    If you don’t have standard 5v power supply and 2A constant current load tester, it is not recommend to calibrate voltage and current. Here is instruction for your reference.

    https://www.droking.com/cs/wp-content/uploads/2021/07/200186-calibration.pdf

    The reserved DIY terminal can be connected to power supply that is not with USB port.

    Best regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Instructions for #200186 35Watt USB power meter-especially calibration
Your information: