You are here:>>Lawn Mower Drive Belt Issue
Lawn Mower Drive Belt Issue 2026-11-12T13:33:38+00:00

Home › Forums › Any Other Products › Lawn Mower Drive Belt Issue

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • Robin Khamari
    Post count: 0

    I have a 22-inch Toro walk-behind lawn mower, and I needed to replace the drive belt. I installed the new belt, but the mower won’t move when I put the belt guard back on. If I remove the guard, the mower moves fine. It also feels like there isn’t enough tension on the belt.

    I’ve tried adjusting the tension, but that hasn’t helped.

    Jammie Tyran
    Post count: 0

    It appears that when the protective belt cover is reinstalled, it may be pressing against the belt itself or coming into contact with one of the pulleys.
    Check that the belt is routed correctly and is seated firmly within the pulley grooves. Even a slight misalignment can cause issues.
    Also, compare the new belt with the old one; they should be identical in both length and width. If everything looks fine, yet the belt still loses tension after the cover is installed, it would be best to try replacing the belt.

    Tawhid Zyron
    Post count: 0

    Sometimes, there can be slight variations in the outer dimensions, meaning the belt may be too short for the housing. Choosing the right belt size is also very important when working on other lawnmowers. This heavy-duty 532130969 drive belt for Husqvarna has a durable Aramid cord. An aftermarket belt with a thicker cord could cause friction between the belt and the plastic guard preventing the mower from moving.

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Lawn Mower Drive Belt Issue
Your information: