Home › Forums › Any Other Products › mini bluetooth stereo amplifier
-
AuthorPosts
-
yoannSeptember 20, 2016 at 7:25 pmPost count: 0
Hi guys, I want to chain 2 (or more amplifier together) for use in multi room.
I have bought 2 amplifier and plan to buy more.
the first one is connected in bluetooth to mobile phone.
then I connect the second to the first one using the headset output from the first one and the aux input from the second.
unfortunately when I plug the cable in the headset output of the first it switch out the amplifier output of the first one.Any Idea how to overcome this issue?
this is very urgent I need it to make it work this week…
thanks for your help
yoann
Hello yoann,
Thank you for writing in.
Could you please tell us your order ID or the link of the products so that we can ensure which products are applied in your application?
If you can, we sincerely hope that you can send us some images of your wiring to let us check the problem details.
You can send this information by email (service at droking dot com).
Looking forward to hearing from you.
Best regardsYoann SernaSeptember 21, 2016 at 8:31 amPost count: 0Talking about those:
In advance thank you
Hello Yoann Serna,
Thank you for your reply.
Because the Audio Out port is for headset.
If you plug in that port, the speakers which are connected to the first amplifier will turn off automatically.
If you want to chain the amplifiers together, you need to use the audio cable with the plug which is shown in the following image to plug it into the Audio Out port.
And the 3.Common part should be vacant then the speakers will not turn off.
Hope this can help you.
Best regards -
AuthorPosts