Hello, I have purchased the “DC-DC Buck Voltage Converter 4.5-40V to 5V/2A Step-down Volt Transformer Stabilizer Voltage Regulator Module.” I am wondering if I supply the converter with 10V input what current must I supply in order to get the full 5V 2A output? Thanks.
Hello George Waters,
Thank you for writing in.
Since there are many products with similar title, it is hard for us to ensure which product you have purchased.
Could you please tell us your order ID or the link of the product so we can ensure the product?
With your help, we can find a solution more quickly.
Best regards
About Drok 3005ADJ. According to Specs:
Input 5.5-32V
Output 1-27V
My goal was to output 6VDC with 18VDC input. I cannot bring the voltage below 17VDC.
Hello Carlos,
Thank you for writing in.
We are sorry to hear that.
Could you please send us the link of product for ensure which product you mention?
And please tell us more detail about your operation. Such as the circuit connection, the load.
Please don’t worry, we will find solution for you once receive your information.
Best regards.
It is the: DROK Waterproof Synchronous DC-DC Converter Buck 5.5-32V to 1-27V Voltage Regulator 24V to 12V to 5V 5A Adjustable VDC Solid Durable Power Supply Board
The option I purchased is the: 5-32V to 1-27V 5A
My input is 18V and I need to Output 6V. The 6V are for 2 devices, one of them is a Raspberry PI 3. Max current required is 1.5A
Hello Carlos,
We are sorry for keeping you waiting.
For confirming the problem exactly,could you please tell us how you connect it?
And some picture will be a great help. You can send the picture to our service email(
service at droking dot com)
Beg your forgiveness and hope you can understand.
Best regards.
George Waters
Carlos