You are here:>>No amperage displayed
No amperage displayed 2020-07-22T02:08:15+00:00

Home › Forums › Voltage Regulator Support › No amperage displayed

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Damon McInnes
    July 22, 2020 at 2:08 am
    Post count: 0
    #41505 Reply |

    Bought your model #200446 and it will not display output amperage of the power supply nor will the cc potentiometer respond. The power supply source is a 12v LI jump pack with a 12000mah capacity. A meter across the supply actually shows 16.3 v dc and the buck regulates it down to 12v nicely and shows it on the display. However the cc potentiometer does not respond to adjustment and the display shows zero amps? Please advise

    Drok
    Keymaster
    July 22, 2020 at 6:21 am
    Post count: 2971
    #41520 Reply |

    Hello Damon McInnes,

    Did you connect load? Without load, there is no load current.  And you can’t adjust current.

    If you don’t want to connect load in advance, please short the output to adjust current.

    Notice: This is available for buck converter only.

    Best regards,

    DROK

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: No amperage displayed
Your information: