You are here:>>Panel meter model advice
Panel meter model advice 2020-03-17T18:16:49+00:00

Home › Forums › Panel Meter Support › Panel meter model advice

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • John Wilshusen
    March 17, 2020 at 6:16 pm
    Post count: 0
    #37628 Reply |

    I am building a panel to monitor power input and output on a rotary phase converter.  This meter sold on Amazon (DROK 0.39 Inches LED 2in1 Multimeter AC 500V 200A Voltmeter Ammeter, AC Volts Meter Panel Ammeter Gauge with Current Transformer, 2-Wires Digital Ammeter Volts Meter Tester https://www.amazon.com/dp/B01M8LCWNW/ref=cm_sw_r_cp_tai_ulrCEb7JET4SG) would work well for size, but I need something capable of measuring and displaying volts/amps to at least 1 decimal place in accuracy (0.1V, 0.1 Amps).  Do you have a similar size and design product with that capability?

    Drok
    Keymaster
    March 19, 2020 at 10:01 am
    Post count: 2971
    #37639 Reply |

    Hello John Wilshusen，

    For large measurement range, it is hard to reach 0.1v or 0.1A resolution.

    Do you need 500V or 200A range? If range can be smaller, there may be some items meet your requirement.

    Best regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Panel meter model advice
Your information: