Regulator Low Output Current – Drok.Blog

HomeVoltage Regulator Support

Regulator Low Output Current 2017-02-13T05:19:04+00:00

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
Shuang Yu
February 13, 2017 at 5:19 am

Post count: 0

#12659 Reply |

We use 180051 switch regulator and want to output 2.5V/2.3A. Current limit is set to 3.5A. Regulator needs to drive long wire (3 feet) to the device. When turn on output, DC voltage is correct, but current is low ~1A. If I use pure large resistor load for 180051 regulator board, it can output 2.5V/2.3A. If I use Agilent power supply to drive long wire/device, it shows 2.5V/2.3A. Any suggestions?

Drok
Keymaster

February 14, 2017 at 9:16 am

Post count: 2971

#12700 Reply |

Hello Shuang Yu,
Thank you for writing in.
Could you please tell us what kind of device you connect?
And it would be great if you can send us some picture to show how the circuit connection.
You can send pictures to service#droking dot com ( please replace # with @).
Please don’t worry, we will find solution for you.
Best regards.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)