You are here:>>Request for product
Request for product 2022-04-17T12:41:36+00:00

Home Forums DROK Customization Request for product

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • Kristopher Cox
    Post count: 0

    <div data-ogsc=”rgb(0, 0, 0)” data-ogsb=”rgb(255, 255, 255)”>I need a delay controller that has only 1 function programmed.  When triggered – its need to wait .1 to 99.9 seconds – turn on the relay for 4 seconds – then shut off. Cycle 1 time. It would need a 3 led segment display w/ decimal point. I would like the set function to only allow change to the delay time up or down the timer is set for.  I need to power it with a 6v source.  Is this something that you can help with?  I would need a qty of 1000 pcs to start.  What would pricing and delivery time be?  Thanks for your time.</div>
    <div>
    <div data-ogsc=”rgb(0, 0, 0)”></div>
    </div>

    Drok
    Keymaster
    Post count: 2892

    Hello Kristopher Cox,

    Does it triggered by signal? And how large is the load power you need to control? We can make some changes based on original item. Is there any product meet your need?

    Kristopher Cox
    Post count: 0

    the timer that I am currently using is this one

    DC 5V 12V 24V Digital LED Display Infinite Cycle Delay Timer Switch ON/OFF Relay Module (DC 5V): Amazon.com: Tools & Home Improvement

    Yes is it triggered by ground.  The application that i am using it for – the end user may need to change the desired delay time and the button sequence to do that needs to be as simple as possible

    Kristopher Cox
    Post count: 0

    P8 is the program function that I need replicated

     

    Drok
    Keymaster
    Post count: 2892

    Hello,

    Sorry, that is not sold by us, we can’t confirm how it is. You may check if there are similar item in our store, below are two for your reference.

    #200119,   https://www.amazon.com/dp/B017GZW0WW?ref=myi_title_dp

    #200399,  https://www.amazon.com/dp/B07DFT2WDS?ref=myi_title_dp

    Kristopher Cox
    Post count: 0

    I have a #200399 – this module would work fine for my needs – just need the custom program setup in the eprom – what would pricing be in qty 1000?

    Drok
    Keymaster
    Post count: 2892

    Hello,

    About custom item, we need to check with factory.  Please confirm custom details firstly.

    1.With trigger signal, there is  0.1 to 99.9 seconds  delay time before turning on relay. Do you hope the delay time is adjusted by user?

    2. Cycle times is once, should we save the setting for cycle times?

    For more detail, would you pleaes send email to service@droking.com?

    Best regards,

    DROK

     

Viewing 7 posts - 1 through 7 (of 7 total)
Reply To: Request for product
Your information: