You are here:>>Support for DROK® USB 2.0 Data Acquisition Card
Support for DROK® USB 2.0 Data Acquisition Card 2016-01-15T02:22:48+00:00

Home › Forums › Advice › Support for DROK® USB 2.0 Data Acquisition Card

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • David Bell
    January 15, 2016 at 2:22 am
    Post count: 0
    #3008 Reply |

    Is there some software support for this USB device?
    I have one on order from Amazon, would like to get started coding for it!

    Thanks
    Dave

    Drok
    Keymaster
    January 15, 2016 at 7:33 am
    Post count: 2971
    #3014 Reply |

    Hi David,
    Here is some information that may help you.
    Software information
    We are sorry there are some Chinese inside.
    Any questions, please feel free to contact us.
    Best regards

    David Bell
    January 15, 2016 at 5:33 pm
    Post count: 0
    #3021 Reply |

    “some Chinese inside”?!?
    Well, the Win apps seem to load and run OK, and I may be able to muddle through the cpp and cs.
    Fortunately, Google Translate seems to handle the comment lines at least fairly well, so I can edit and replace them!

    Thanks – I’ll see how it goes, when I get the module, hopefully tomorrow.

    Dave

    David Bell
    January 16, 2016 at 7:26 pm
    Post count: 0
    #3029 Reply |

    I received the module a few minutes ago, and it appears to work fine, setting and clearing bits with the WinApp.exe programs. Haven’t probed the pins as yet.

    However, I can’t yet recompile the software, so I’m almost poking at random in the App.

    Can you please supply English translations for the 7 labels on the App form?
    Reading across the top, left-to-right, I assume the first is Set Pin Low, and the second is Set Pin High, but what are the next three?
    Possibly set Input/Output, and Enable Weak Pull-up?
    Pretty sure the last one is Pin State, but is it updated continuously, or only when commanded to read pins?

    And what are the two on the bottom of the form?
    The one on the left may be Read Pin or Update Pin; not sure.

    Thanks!

    Dave

    David Bell
    January 17, 2016 at 10:57 pm
    Post count: 0
    #3032 Reply |

    Are you (Drok) interested in an upload of an English version of the WinApp?

    Drok
    Keymaster
    January 19, 2016 at 8:16 am
    Post count: 2971
    #3041 Reply |

    Hi David,
    Sorry for the late reply as the weekends.
    Here is illustration for the 7 labels you mentioned.
    7 Labels
    Hope this will help you.
    Best regards

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: Support for DROK® USB 2.0 Data Acquisition Card
Your information: